Latest

NEWS

The clutch has several friction plates. The friction clutch basically consists of four major parts

Friction plate carefully crafted Vios clutch has several friction plates friction clutch basically consists of which four major parts:1. What are the basic components of the friction clutch?The friction disc clutch is basically composed of an active part, a driven part, a compression mechanism and an operating mechanism.1. Active part: flywheel, clutch cover (not clutch housing), pressure plate;2. Driven part: driven disk assembly with torsion shock absorber (driven wheel hub, driven disk body, friction plate);3. Compression part :16 circular coil springs; The clutch has several friction plates.4. Operating mechanism: disengaging sleeve and disengaging fork (located inside the clutch) < How the friction plate of the clutch works.The engine flywheel is the active part of the clutch. The driven disc with friction plate and the driven wheel hub are connected to the driven shaft (i.e. the drive shaft of the transmission). The compression spring presses the driven disc against the flywhe...

Latest

NEWS

After the car clutch is worn, should we adjust the clearance or replace the friction sheet?

After the automobile clutch is worn, it is necessary to decide whether to adjust the clearance or replace the friction plate according to the specific situation. ‌The following conditions may occur when the clutch is worn out: ‌ clutch pedal becomes heavier ‌ : If the clutch pedal is heavier than before and there is no problem in the transmission from the clutch pedal to the clutch, this may be because the clutch disc has become thinner. In this case, if the pedal is too heavy and you do not want to step on it, you can consider replacing the clutch disc. However, if it is only thinner and does not affect the normal work, you can continue to use it for a period of time ‌.1‌ The clutch disengages at the slightest step ‌ : This indicates that the clutch disc may be worn excessively. When the clutch disc is thin to a certain extent, the clamping force of the pressure disc is insufficient, at this time, the clutch disc should be replaced as soon as possible, because continued u...

Latest

NEWS

How often do motorcycle brake pads change?

For the brake pad replacement of a motorcycle, the replacement cycle needs to be determined according to the type of brake pad. If the drum brake is used, it generally needs to be replaced once at about 10,000 to 15,000 kilometers; If the disc brake is used, it can generally be replaced after driving 6,000 kilometers. In addition, for the rear drum brake pads, generally need to be replaced in about 30,000 kilometers. In the process of driving, the brake shoe needs to be checked every 5,000 kilometers to ensure that its wear state, whether the degree of wear on both sides is consistent and whether the return is free. If an anomaly is found, it must be handled immediately.How to determine whether the brake disc needs to be replaced? First of all, you can judge by observing the thickness of the brake pads. The thickness of the new brake pads is generally about 1.5 cm, and the thickness of the brake pads will gradually become thinner with the friction during use. When the naked eye observe...